PRODUCTION OF CASSAVA OF STARCH FROM CASSAVA
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | 1 order. | Marked useful: 6,360 times
Delivery: Within 24 hoursABSTRACT
The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A and sample B respectively (edible and textile starch) which weighed 13.1kg.
During this process, the temperature were obtained at 700c (617.4R). And the other properties of the cassava samples were carried out, such as moisture content of the fresh cassava 59.82% (Sample A), Textile starch 52.02% (Sample B) and edible starch (Sample C). the average mean percent of ash content of Sample A, edible starch was 2.6% while that of (Sample B, fresh crush cassava was 2.1%.
Also determination of cyanide content of fresh cassava 14.13ml. Textile 5.0ml and edible starch 4.48ml.
TABLE OF CONTENT
CHAPTER ONE
1.0 Introduction
1.1 Scope and objective
CHAPTER TWO
2.1 History of cassava
2.2 Environmental condition for cassava growth
2.3 Cultural method of cultivation/harvesting
2.4 Harvesting/storage
2.5 Nutritive composition of cassava
2.6 Method of cassava processing
2.7 Toxicity of cassava processing and it’s material
2.8 Starch chemistry
2.9 Physical properties of starch
2.9.1 Chemical properties of starch
2.9.2 Starch processing
2.9.3 Hydrolysis of local starch
CHAPTER THREE
3.0 Production of starch from cassava (textile starch)
3.1 Production of starch from cassava (edible starch)
3.2 Drying process
3.2.1 Determination of ash content
3.2.2 Determination of moisture content of fresh cassava,
textile and edible starch
3.2.3 Determination of cyanide content of fresh crushed
cassava textile and edible starch
3.3.4 Preparation of 5% of Na0H solution
3.3.4.1 Tytration experiment with AgN03 (Silver Nitrate)
CHAPTER FOUR
4.0 Result and Discussion
4.1 Table ash content
4.2.1 Determination of moisture content sample A
4.2.2 Sample b (textile starch)
4.2.3 Sample C Edible starch
4.3.1 Determination of cyanide content sample A
4.3.2 Edible starch (sample B)
4.3.3 Textile starch (sample C)
CHAPTER FIVE
5.0 Conclusion and Recommendations
5.1 Conclusion
5.2 Recommendation
Appendix A
Appendix b
Appendix C
Appendix d
Graps
References
CHAPTER ONE
1.0 INTRODUCTION
Cassava was known to the world before the discovery of America. The Portuguese settlers found the native Indian’s in Brazil growing the cassava plant and Pierre Marty wrote in 1490 that the poisonous roots of a “Yucca” were used in the preparation of bread. Cassava were introduced to the Westerner const of Africa in the sixteenth centuries while the word topioca derived from tapioca. The tipi Indian’s name the liquid which is extracted from the tubers and made into pellets called tipicoet. The edible tubers, which serves as food in many tropical countries as well as source of starch, it also serves as principal food for workers in minning and industrial centers in most countries too.
Cassava is a single species, manihot esculent crante (synonymous with mainhot utilissmapolhe) it is a tuberous dicotyledous plant, belonging to the botanical family of Euphorbiacca, and like most other members of that family. The cassava plant contain latifiers and produces latex. The cassava tuber contains and mainly water and carbohydrate with waters having a greater proportion and a small significant amount of cyanogenic glucoside (prussic acid) of all the constituents of cassava tubers. Two major factors limits its utilization. In the form of the fresh (unprocessed) tuber. The first is that the unprocessed tuber has relatively high amount of prussic acid, which is highly poisonous to human and animal when consumed. The second factor is that fresh cassava tubers cannot be stored more than a few days after harvest. The tuber begins to deteriorate rapidly as a result of enzymatic process in the presence of water contained in the tuber.
It is an important food crop in tropical countries such as Brazil, Nigeria, Indonesia and Thailand. The roots of the cassava are rich in starch and are consumed as human food or animal feed. Small amount of it’s root are converted into industrial products. Today Thailand are the world leaders of starch production from cassava.
TABLE 1
BELOW IS RECENT WORLD PRODUCTION OF CASSAVA NOT IN THE YEAR 2001.
Country
Volume (million)
Nigeria
33,854,000
Brazil
24,481,356
Thailand
18,283,000
Congo
15,959,000
Indonesia
15,800.00
Ghana
7,845,440
Tanzania
5,757,968
India
5,800,00
Mozambique
5,361,974
China
3,700,900
Others
175,617,389
SOURCE: FAD STA, 2001
SCOPE AND OBJECTIVE
The objective of this project is based on the production of starch from cassava, using a manual instrument called greater to open all the tuber cell. So that the starch granules are easily released and extracted through hydraulic press, or sieve (mesh). However it has been observed that cassava flour produced through different process have different quanlities.
SCOPE
The following analysis were carried out cyanide content, production of Edible and textile starch, Ash content of edible and fresh crushed cassava, moisture content of fresh crushed cassava, textile starch and edible starch. At the end of the work, the result of these analysis were shown.
This material content is developed to serve as a GUIDE for students to conduct academic research
Delivery: Within 24 hours
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
PREPARATION OF SOAP USING DIFFERENT TYPES OF OILS AND EXPLORING ITS PROPERTIES
ABSTRACT Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification proces...More »
Item Type: Project Material | 50 pages | 0 engagements |
- 2.
THE REFURBISHMENT OF TEMPERATURE CONTROL APPARATUS
ABSTRACT A temperature control apparatus an “Armfield model was refurbished. The methodology employed were to detect the pulty parts of the ...More »
Item Type: Project Material | 50 pages | 8,685 engagements |
- 3.
PRODUCTION OF CRUDE OIL-DRILLING PROCESS
ABSTRACT The tremendous (large) demand of some petroleum fractions in our modern world today has drive some professionals...More »
Item Type: Project Material | 50 pages | 0 engagements |
- 4.
PRODUCTION OF LIQUID AND VAPORIZED PERFUME
ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The ...More »
Item Type: Project Material | 50 pages | 14,636 engagements |
- 5.
PROCESS AND QUALITY FACTORS IN LAUNDRY AND TOILET SOAP PRODUCTION
ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the...More »
Item Type: Project Material | 50 pages | 9,208 engagements |
- 6.
THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT
ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials use...More »
Item Type: Project Material | 50 pages | 9,180 engagements |